Side by side
| Vinyl liner | Fiberglass | Gunite | |
|---|---|---|---|
| Published Long Island price | $35,000 – $100,000 | $45,000 – $120,000 | $60,000 – $250,000 |
| Median of published ranges | $55,000 | $75,000 | $102,500 |
| Shape | set kits, some custom | set factory models | anything |
| Build time | shorter | shortest on site | about 10–16 weeks (one LI builder) |
| Recurring cost | new liner about every 8–10 years ($4,000 – $7,500) | none for the shell | resurfacing ($6,000 – $15,000) |
| Access needs | excavator | excavator plus crane | excavator plus concrete trucks |
When vinyl makes sense
Vinyl is the entry point: the lowest published price and a wide choice of rectangles and freeforms. It suits buyers who want a standard shape at the lowest up-front cost and accept a liner change about once a decade. On small lots like Levittown’s, where the Town of Hempstead caps a pool at 40% of the rear yard, a modest vinyl rectangle is often the most pool for the money.
When fiberglass makes sense
A fiberglass shell arrives finished, so there’s no on-site curing and no interior finish to renew. The trade-offs: you choose from set models, and the shell has to be trucked in and craned over the house. Before choosing, check the crane’s path for overhead wires; Oyster Bay already requires a letter confirming the pool itself is 10 feet from any overhead wire.
When gunite makes sense
Gunite is the custom option: built-in spa, tanning ledge, an odd-shaped yard, a deep end for diving. It has the widest price spread because it’s priced like construction, not a product. One Long Island builder publishes a 16×32 with standard features at $105,000 – $130,000. Roomy North Shore and mid-Suffolk yards (Syosset, Dix Hills) are where most of these get built.
The question to ask every builder
Price all three for the same size and the same patio, fence and equipment, then add 20 years of liners or resurfacing. That turns a sticker-price comparison into a cost-of-ownership comparison. Full survey: Long Island pool prices.
Need it done? Call for inground pool installation on Long Island. Local guides: pools in Levittown, pools in Syosset, pools in Dix Hills.
Frequently asked questions
Which pool type lasts longest on Long Island?
Gunite shells last the longest but need resurfacing; one Long Island renovator publishes plaster lifespans of 5 to 7 years and pebble 10 to 15. Fiberglass needs no liner or replastering. Vinyl needs a new liner about every 8 to 10 years.
Which pool type is cheapest over 20 years?
It depends on the quotes you get, but the math is: vinyl's lower build price plus two liners ($4,000 – $7,500 each) versus fiberglass's higher build price with no liners. Gunite adds a resurfacing or two ($6,000 – $15,000).
Which pool type fits a tight Long Island yard?
Gunite, usually. It's formed on site to any shape, so it can fill an irregular space inside the setbacks. Fiberglass needs a crane that can reach the yard, and vinyl kits come in set shapes.