What gunite pools cost on Long Island
| Job | Published LI range | Median |
|---|---|---|
| Inground gunite (concrete) pool, installed | $60,000 – $250,000 | $102,500 |
| Mid-size 16×32 gunite pool, standard features | $105,000 – $130,000 | $117,500 |
| Gunite / concrete pool resurfacing | $6,000 – $15,000 | $10,500 |
Full breakdown and method: Long Island pool price survey.
What gunite gets you
Gunite is concrete sprayed over a steel-reinforced shell formed in the ground. Because it’s built on site, a gunite pool can match an odd-shaped yard, step down a slope, wrap around a patio, or include a spa, tanning ledge, benches and a beach entry in one structure. It’s the type most custom backyards use, and it has the widest price range of the three for that reason.
Size and price
| Size (published by one Long Island builder) | Price |
|---|---|
| Small, 14×28 | from $90,000 |
| Mid-size, 16×32, standard features | $105,000 – $130,000 |
| Large, 20×40 | often over $140,000 |
| Custom with spa, waterfall, premium finish | can reach $200,000 to $400,000 |
Across all the Long Island sources we found, gunite ran $60,000 – $250,000. Adding a spa to a new pool runs $15,000 – $25,000 on one builder’s published list.
The build, step by step
- Layout and excavation. The shape is staked to match the permit drawings (in the Town of East Hampton and the Village of East Hampton, a licensed surveyor stakes it before digging).
- Steel and plumbing. Rebar is tied to the engineered spacing and the suction and return lines are run. Suction outlets need entrapment protection under the state code.
- Shooting the shell. The concrete is sprayed and shaped, then cures.
- Tile, coping and finish. The waterline tile and coping go on, then the interior finish.
- Equipment and start-up. Pump, filter, heater and controls. On the East End, the pump is sized by code: in the Town of Southampton, pools of 800 square feet or more need a variable-speed pump, and East Hampton limits filtration to off-peak hours.
Finishes and upkeep
The interior finish sets how often you’ll resurface. A Long Island renovator publishes per-square-foot prices and lifespans: plaster $4–$7 (5–7 years), pebble $7–$12 (10–15 years), fiberglass finish $15–$25 (20+ years). Plan a resurfacing in the long-term budget: $6,000 – $15,000 on published Long Island prices. See pool resurfacing.
Is gunite right for your yard?
Gunite needs access for concrete trucks and an excavator, and the same setbacks as any pool. In tight yards with strict setbacks (Rockville Centre’s rear-third rule, Garden City’s 20- to 35-foot setbacks), a custom gunite shape is often what makes a pool fit at all. Check your town on the pool permits page before you settle on a size.
Frequently asked questions
How much does a gunite pool cost on Long Island?
Published Long Island prices run $60,000 – $250,000, with a median of $102,500. By size, one builder lists a 14×28 from $90,000, a 16×32 at about $105,000 to $130,000, and a 20×40 often over $140,000.
How long does it take to build a gunite pool on Long Island?
One Long Island builder publishes 10 to 16 weeks of construction, including curing, plus 4 to 6 weeks for the permit.
How often does a gunite pool need resurfacing?
It depends on the finish. One Long Island renovator publishes lifespans of 5 to 7 years for plaster, 10 to 15 years for pebble and 20+ years for a fiberglass finish. Resurfacing runs $6,000 – $15,000 on published Long Island prices.
Is gunite worth it over vinyl?
If you want a custom shape, a built-in spa or a long life, usually yes. If budget comes first, vinyl's published entry price ($35,000 – $100,000) is far lower, but the liner needs replacing every 8 to 10 years.
Where do gunite pools make the most sense on Long Island?
On lots that need a custom shape or depth: sloped harbor-side lots, irregular yards and high-value properties where the pool is part of a full outdoor build. Published Long Island prices run $60,000 – $250,000.