What pool renovation costs on Long Island
| Job | Published LI range | Median |
|---|---|---|
| Gunite / concrete pool resurfacing | $6,000 – $15,000 | $10,500 |
| Inground vinyl liner replacement | $4,000 – $7,500 | $6,000 |
| Attached spa / hot tub added to a new pool | $15,000 – $25,000 | $20,000 |
Full breakdown and method: Long Island pool price survey.
What people renovate
- Surface or liner. The most common trigger. Resurfacing a gunite pool runs $6,000 – $15,000; a vinyl liner $4,000 – $7,500.
- Tile and coping. Cracked coping and loose waterline tile are best done while the pool is empty anyway.
- Equipment. Pumps, filters, heaters, salt systems, automation and LED lighting. One Long Island design-build firm publishes LED lighting packages at $3,000 to $6,000.
- Features. A tanning ledge ($3,000 to $8,000 on the same firm’s list), a waterfall ($5,000 to $20,000) or an attached spa ($15,000 – $25,000).
- Safety. A safety cover, pool alarm, door alarms or a new barrier to meet current code.
Rules that can apply to a remodel
| Where | What a renovation can trigger |
|---|---|
| Statewide | Pool alarm; suction-outlet entrapment protection; door alarms if the house forms part of the barrier |
| Town of Southampton | Pools rebuilt since 2009: 2-inch piping over 500 sq ft; variable-speed pump at 800+ sq ft |
| Village of Southampton | Rebuilt since 2010: sweep elbows only, no right-angle elbows |
| Town of East Hampton | Rebuilt since 2016: time switch; filtration off-peak only; equipment enclosed on all sides |
| Town of Shelter Island | Any repair or renovation over $5,000 needs a permit |
| Town of Oyster Bay | Gas heater by a licensed plumber; propane heater needs Fire Marshal approval |
Check your own office: pool permits by town.
Renovate or remove?
If the pool needs a new shell surface, equipment, coping and a fence upgrade all at once, price a removal ($10,000 – $25,000 for a full one) next to the renovation. Many owners renovate because a pool adds to how they use the yard; others remove because the cost of keeping it no longer does.
Starting from a pool nobody has opened in years
Many renovations start with a new homeowner and a pool the previous owners stopped using. Begin with an assessment (shell or liner, a plumbing pressure test, equipment, fence) before anyone opens or drains it. The step-by-step version, with published prices for each likely repair, is in reopening an old pool.
Frequently asked questions
Do I need a permit to renovate a pool on Long Island?
It depends on the scope and the town. Resurfacing alone often doesn't, but changing the shape, adding a spa, new electrical or a new heater usually does. On Shelter Island, any repair or renovation over $5,000 counts as reconstruction and needs a permit. In Oyster Bay, a gas heater goes on the pool permit with a licensed plumber, and a propane heater needs Nassau County Fire Marshal approval.
Can I add a spa to my existing pool?
Often, with a raised or attached spa sharing the pool's equipment, or a separate unit. One Long Island builder publishes $15,000 – $25,000 for an attached spa on a new pool; adding one to an existing pool depends on the plumbing and shell.
What code updates come with a remodel?
Under the 2025 state code, pools need alarms and entrapment protection for suction outlets, and doors from the house to the pool area need alarms if the house is part of the barrier. Pools built or rebuilt after set dates on the East End must meet pipe-size and pump-type rules (Southampton Town since 2009, Southampton Village since 2010, East Hampton since 2016).
Is it worth renovating an old pool or starting over?
Price both. A new liner ($4,000 – $7,500) or resurfacing ($6,000 – $15,000) usually beats a new pool ($35,000 – $100,000 and up), unless the pool sits where today's setbacks wouldn't allow it or the structure has failed.