What salt conversion costs on Long Island
| Job | Published LI range | Median |
|---|---|---|
| Salt water chlorine system | $2,000 – $5,000 | $3,500 |
| Inground vinyl liner replacement | $4,000 – $7,500 | $6,000 |
Full breakdown and method: Long Island pool price survey.
What a conversion actually involves
A “salt water pool” is still a chlorine pool. A salt chlorine generator, the cell plumbed into the return line plus its control box, turns dissolved salt into chlorine as water passes through. You add pool-grade salt to the water once, then top it up as splash-out and backwash carry it away. Manufacturers typically call for salinity around 3,000 parts per million, far below seawater.
So a conversion is mostly plumbing and electrical: the cell after the filter and heater, a bonded and GFCI-protected control box near the equipment, and the salt. Nothing about the pool shell or liner has to change.
Doing it with a liner replacement
Facebook groups across Long Island are full of the same request: “replace the inground liner and convert to salt water.” It makes sense to combine them. The pool is drained and refilled for the liner anyway, the crew is already at the equipment pad, and you pay for one fill instead of two. Published Long Island prices: liner replacement $4,000 – $7,500, salt system $2,000 – $5,000.
The other common complaint in those groups is a company that measured, gave an estimate and never came back. Protect yourself with one written quote that lists the liner gauge and pattern, the salt system make and model, the start date and the deposit terms, and check the company’s Nassau or Suffolk home-improvement license first (how to check a pool contractor).
Before any liner job on Long Island’s wetter ground, ask about groundwater. In places like Massapequa, Merrick, Montauk and Shelter Island, a large share of the land has a seasonal water table within about 3 feet (USDA soil survey), and an empty vinyl pool can float its liner or heave its floor. A good crew checks before it drains (liner replacement).
What salt changes around the pool
- Stone: porous natural stone coping and patios can wear where salty splash dries. Seal it, rinse it, or choose a denser stone (pool patios and coping).
- Heaters: check that your heater’s heat exchanger is rated for salt pools before converting; some older units aren’t.
- Metal: ladders, rails and lights need proper bonding, which the electrician should verify when the control box goes in.
- Draining: salt water can’t go into a cesspool, septic system or wetland in many Long Island codes. Plan on-lot disposal through a dry well (pool drainage and dry wells).
Semi-inground and older pools
Semi-inground pools with salt systems and stone work around them are a frequent request in Suffolk, especially around Manorville. A salt cell works the same way there; confirm the wall system’s warranty allows salt. For an older pool that hasn’t run in years, get it working on chlorine first and convert once the plumbing and equipment check out (reopening an old pool).
Frequently asked questions
How much does it cost to convert a pool to salt water on Long Island?
The salt system itself runs $2,000 – $5,000 on published Long Island prices. Done with a liner replacement ($4,000 – $7,500), the total is the two added together, less one trip and one water fill.
Can I replace my liner and convert to salt at the same time?
Yes, and it's the most common way it's done here: the pool is drained and refilled for the liner anyway, and the salt goes into the new water. Ask the liner company to quote both on one written estimate with a start date.
Is salt water bad for stone coping and patios?
Salt can wear porous natural stone over time, especially where splash-out dries and recrystallizes. Sealing the coping and patio stone, and rinsing splash areas, is the usual advice; ask your mason which stones they'd use around a salt pool.
Do semi-inground pools work with salt systems?
Yes. A salt cell works the same on a semi-inground pool. Check that the pool's wall and liner manufacturer allows salt, since some above-ground and semi-inground wall systems have their own guidance.
Where can I drain a salt water pool on Long Island?
Not into a cesspool, septic system, wetland, street or neighbor's yard in most Long Island codes. Several towns require on-lot disposal through a dry well, and Shelter Island bars pool water from septic systems and surface waters entirely. Check your town's rule before draining.