What resurfacing costs on Long Island
| Job | Published LI range | Median |
|---|---|---|
| Gunite / concrete pool resurfacing | $6,000 – $15,000 | $10,500 |
Full breakdown and method: Long Island pool price survey.
Finishes compared
| Finish | Published per sq ft (one LI renovator) | Published lifespan |
|---|---|---|
| Plaster (marcite) | $4–$7 | 5–7 years |
| Pebble | $7–$12 | 10–15 years |
| Fiberglass finish | $15–$25 | 20+ years |
Quartz finishes sit between plaster and pebble in price and durability. One Nassau and Suffolk builder notes that standard plaster often needs attention closer to the 7-year mark in real-world conditions. Across Long Island sources, a full resurfacing ran $6,000 – $15,000, and one builder publishes $10,000 to $20,000 for concrete pools once preparation, labor and shell repairs are included.
What the job involves
- Drain and inspect. Once the pool is empty, cracks, hollow spots and tile or coping problems show up. This is when the price can change, so ask how repairs will be priced.
- Prep. The old surface is chipped, sandblasted or bond-coated so the new finish adheres.
- Tile and coping. Often replaced at the same time, since the pool is already empty.
- Apply the finish. Then the pool is refilled and the water is balanced carefully while the finish cures.
Use the downtime
A drained pool is the cheapest moment for other work: new waterline tile and coping, LED lights, a tanning ledge, or new equipment. If you’re near the code thresholds, some towns’ rules kick in: on Shelter Island, any repair or renovation over $5,000 counts as reconstruction and needs a permit, and the Town of Southampton requires variable-speed pumps on pools of 800 square feet or more. See pool renovation and resurfacing and liner costs.
Frequently asked questions
How much does it cost to replaster a pool on Long Island?
Published Long Island prices for resurfacing run $6,000 – $15,000. By finish, one renovator publishes $4–$7 per square foot for plaster, $7–$12 for pebble and $15–$25 for a fiberglass finish, measured on the whole interior surface.
How do I know my pool needs resurfacing?
Rough patches that scrape feet, stains that won't brush out, chalky water, hollow-sounding or flaking areas (delamination), and fine cracks. A pool that loses water may have a crack or a plumbing leak; find out which before resurfacing.
When is the best time to resurface a pool on Long Island?
Early spring or after Labor Day. Resurfacing needs an empty pool and mild weather for the finish to cure, and booking ahead of opening season keeps the summer free.
When is the best time to resurface a gunite pool on Long Island?
Late spring or early fall, when temperatures suit curing, and book it in winter, since resurfacing crews fill their spring schedules early.