What counts as a plunge pool
There’s no code definition. Builders use the name for a small, deep pool (Angi’s 2026 size table runs from 4 by 4 to 13 by 7 feet), often fiberglass or concrete, often heated, sometimes with jets so it doubles as a spa. It’s built for cooling off and soaking, not swimming laps.
Prices: national figures, not local ones
No Long Island builder we found publishes plunge pool prices, so we won’t invent one. Angi’s 2026 national figures, installed:
| Plunge pool | National range (Angi, 2026) |
|---|---|
| Vinyl | $10,000 – $30,000 |
| Fiberglass | $18,000 – $55,000 |
| Concrete | $20,000 – $75,000 |
| National average | about $28,000 |
For scale, the lowest published Long Island price for a full-size inground vinyl pool is $35,000, and a full-size gunite pool runs $60,000 – $250,000. A plunge pool saves on excavation, concrete or shell, water and chemicals, but not on the permit, the barrier, the electrical work or the heater.
Small pool, same rules
Long Island codes don’t scale down for small pools:
- Depth triggers the code. Babylon regulates pools more than 18 inches deep, Smithtown more than 24 inches, Garden City more than 2 feet, Islip anything deeper than 18 inches or larger than 100 square feet for its barrier rule.
- Setbacks don’t shrink. A plunge pool needs the same 10 feet from side and rear lines in Brookhaven, or 10 to 25 feet by district in Islip.
- Lot minimums still apply. Garden City allows no pool on a plot under 12,000 square feet.
- Alarm and barrier under the state code, plus any local fence rules.
Where a small pool helps is on lots where a 16-by-32 won’t fit inside the setbacks but a 10-by-14 will. Check your town’s pool rules and the lot size guide before you pick a size. Prices by size and the extras a project adds: plunge pool cost.
Frequently asked questions
How much does a plunge pool cost on Long Island?
We couldn't find a Long Island builder that publishes plunge pool prices, so here are national figures: Angi's 2026 data puts inground plunge pools at $10,000 to $55,000 (vinyl $10,000 to $30,000, fiberglass $18,000 to $55,000, concrete $20,000 to $75,000). National ranges may not include the permit, fence and patio a Long Island job needs. The lowest published Long Island price for a full-size inground pool is $35,000.
Does a plunge pool need a permit and fence on Long Island?
Yes. Codes regulate pools by depth, not size: Babylon and Brookhaven at more than 18 inches, Smithtown at more than 24 inches, Garden City at more than 2 feet. A plunge pool is usually deeper than any of those, so it needs the permit, the barrier and the alarm like any pool.
Can a plunge pool fit where a regular pool can't?
Sometimes. It shrinks the footprint, but the setbacks don't shrink. In the Village of Garden City, for example, no pool of any size is allowed on a plot under 12,000 square feet, and the Town of Hempstead caps pools and other accessory structures at 40% of the rear yard.