Long Island · Nassau, Suffolk & East End

Fiberglass inground pools on Long Island

What fiberglass pools cost on Long Island

Fiberglass Pools, installed on Long Island (November 2026)
JobPublished LI rangeMedian
Inground fiberglass pool, installed $45,000 – $120,000 $75,000

Full breakdown and method: Long Island pool price survey.

How a fiberglass install works

The builder digs the hole to the shell’s dimensions and prepares a level gravel base. The shell arrives on a truck, a crane lifts it over the house or fence and lowers it in, and the crew levels it, connects the plumbing, and backfills while filling the pool with water so the pressure stays balanced. Then come the coping, patio, fence and equipment. Because the shell is finished in the factory, there’s no curing or interior finish step on site.

Planning for the crane

Delivery is the part most people don’t think about:

  • Overhead wires. Crane lifts and pools both need clearance. The Town of Oyster Bay requires a certification letter that the pool is at least 10 feet horizontally from any overhead utility wire; Brookhaven bars a pool within 10 feet of the ground under transmission lines and wants a utility clearance within 25 feet.
  • Reach. The crane sets up in the street or driveway and has to reach the hole. A deep lot or a wide house can push the lift beyond a crane’s reach.
  • Model sizes. Shells come in set lengths, widths and depths, and very wide shells can’t travel by road. If you want something custom or very large, that points to gunite.

Cost compared with the other types

Type Published Long Island range
Vinyl liner $35,000 – $100,000
Fiberglass $45,000 – $120,000
Gunite $60,000 – $250,000

Fiberglass sits between vinyl and gunite on published prices. Its long-term savings come from skipping liner replacements and replastering.

Rules still apply

A fiberglass pool needs the same permit, setbacks and barrier as any other pool. In the Town of Oyster Bay, inground pools need plans sealed by an architect or engineer. See your town’s pool rules and the fence requirements.

Frequently asked questions

How much does a fiberglass pool cost on Long Island?

Published Long Island prices run $45,000 – $120,000, median $75,000. One Nassau and Suffolk builder publishes $45,000 to $85,000 for fiberglass, compared with $60,000 to $120,000+ for gunite of similar size.

Is fiberglass better than vinyl on Long Island?

Fiberglass costs more up front, but there's no liner to replace (vinyl liners run $4,000 – $7,500 about every 8 to 10 years) and the gelcoat surface is smooth and resists algae. Vinyl wins on entry price and shape flexibility.

Can a fiberglass pool go in a tight Long Island yard?

Sometimes. The shell arrives on a truck and is lifted in by crane, so overhead wires, trees and narrow access can rule out a model or a spot. Oyster Bay already requires a letter confirming the pool is 10 feet from overhead wires, and Brookhaven bars pools within 10 feet of the ground under transmission lines.

Can a fiberglass pool go in where the water table is high?

Yes, with care: a fiberglass shell can lift if it's emptied when groundwater is high, so it needs a hydrostatic relief valve and shouldn't be drained without checking the water table first. That matters most on the south shore and on till soils.

Sources

  1. Nassau/Suffolk pool builder: gunite vs fiberglass pool cost comparison
  2. Town of Oyster Bay pool permit checklist (overhead wire clearance letter)
  3. Town of Brookhaven Code § 85-891 (overhead transmission lines)

Get a written price for your pool project

Tell us your town and the project. A licensed, independent Long Island pool company calls you back and gives you the price before any work starts. Free to ask, no obligation.

Get a free quote Call (631) 856-2404
  • No fee to you
  • Price in writing first
Call (631) 856-2404 Get a quote