What inground pools cost on Long Island
| Job | Published LI range | Median |
|---|---|---|
| Inground vinyl liner pool, installed | $35,000 – $100,000 | $55,000 |
| Inground fiberglass pool, installed | $45,000 – $120,000 | $75,000 |
| Inground gunite (concrete) pool, installed | $60,000 – $250,000 | $102,500 |
Full breakdown and method: Long Island pool price survey.
The three ways an inground pool is built here
Gunite (sprayed concrete). Steel is tied into the excavated shape, concrete is sprayed over it, and the shell is finished with plaster, quartz or pebble. Because it’s formed on site, it can be any size, shape or depth, with built-in steps, benches, tanning ledges and spas. It’s also the longest build: one Long Island builder publishes 10 to 16 weeks of construction, with curing time. Published Long Island range: $60,000 – $250,000. More on gunite pools.
Vinyl liner. Wall panels (steel or polymer) are set around the excavation, a sand or cementitious floor is shaped, and a custom vinyl liner holds the water. It’s the lowest-cost inground option on published Long Island prices ($35,000 – $100,000), but the liner wears out, typically every 8 to 10 years at $4,000 – $7,500. More on vinyl liner pools.
Fiberglass. A one-piece shell built in a factory is trucked in and lowered into the hole by crane. Installation is fast and the gelcoat surface doesn’t need replastering or a liner, but you choose from set models, and the width is limited by what can travel by road. Published Long Island range: $45,000 – $120,000. More on fiberglass pools.
If a fully inground pool doesn’t fit the budget or the yard, a semi-inground pool is the next step down.
What happens, in order
- Site visit and design. The builder checks access for excavators (and a crane for fiberglass), overhead wires, slope, septic or cesspool location, and where the water will drain.
- Survey and plans. Your town’s setbacks are measured from the lot lines on a current survey. Some codes require plans sealed by an architect or engineer (Town of Oyster Bay, Garden City) or a surveyor’s stake-out before the permit (Town of East Hampton).
- Permit. Filed with your town, city or village. Some need extra approvals first: Nassau County Health Department in North Hempstead, Suffolk County Health Department for inground pools in the Village of Lindenhurst, the Board of Trustees within 100 feet of a wetland in Southold.
- Excavation and build. A temporary fence goes around the hole; the shell, plumbing, equipment and electrical bonding go in and are inspected.
- Patio, fence and final inspection. The permanent barrier must be up before any water goes in under most codes, then the final inspection and certificate.
The rules that decide where it goes
Every Long Island office we read has its own pool code. A few that change the design most:
- Setbacks: 4 feet from side and rear lines in the Town of Hempstead, 6 feet in the Town of Babylon, 10 feet in Brookhaven and North Hempstead, 10 to 25 feet by district in Islip, and 20 to 35 feet in Garden City.
- Fences: the state minimum is 4 feet; the Town of Hempstead requires 5 feet, and North Hempstead, Garden City and Rockville Centre 6 feet. See pool fence requirements by town.
- Power lines: Brookhaven bars pools within 10 feet of the ground under overhead transmission lines; Oyster Bay wants a letter confirming 10 feet of clearance from any overhead wire.
- Water: most codes keep pool water on your lot, and East End towns require dry wells.
Find your office: Long Island pool permits by town.
Small inground pool cost: simple and moderately priced
The most common real request isn’t a luxury build. It’s what one Long Island homeowner posted: a new pool construction company, not gunite, fairly small, simple, reliable, as moderately priced as possible. That’s usually a vinyl liner rectangle, the lowest published installed price on Long Island at $35,000 – $100,000 (median $55,000). Keep it simple with a standard size (14×28 or 16×32), a single set of steps, no spa and a modest patio. The patio and fence are where small pools quietly double in price. If the yard is tight, a plunge pool or a semi-inground pool costs less again.
Choosing pool builders and swimming pool contractors
“Who have you used to put in a pool?” is the question every builder thread starts with. Whoever you call, get two or three written estimates that each name the same things: pool size and type, wall material, liner gauge or finish, equipment make and model, patio square footage, fence, permit and survey, and the start date. Check each company’s Nassau or Suffolk home-improvement license before you pay a deposit (how to check a pool contractor). Builders who handle everything (permit, dig, electrical, fence and grading) cost more up front but leave fewer gaps than hiring each trade yourself.
Frequently asked questions
Which inground pool type is best for Long Island?
It depends on budget, shape and how long you'll stay. Vinyl has the lowest published entry price ($35,000 – $100,000) but needs a new liner every 8 to 10 years. Fiberglass ($45,000 – $120,000) installs fastest and needs no liner or replastering, but shell sizes are limited. Gunite ($60,000 – $250,000) can be any shape and lasts the longest, at the highest price.
How long does inground pool installation take on Long Island?
One Long Island builder publishes 4 to 6 weeks for the permit and 10 to 16 weeks of construction for a gunite pool, because the concrete has to cure. Vinyl and fiberglass pools are usually built faster once the permit is in hand.
When should I start planning a pool on Long Island?
In the fall or winter. Design, survey, plans and the permit come before any digging, and some towns add steps (a surveyor's stake-out in East Hampton, Health Department approval in North Hempstead and Lindenhurst, a utility clearance letter in Oyster Bay).
Does my house's lot size limit the pool?
Often. Setbacks, lot-coverage caps and the fence all eat into the yard. The Town of Hempstead caps a pool at 40% of the rear yard, North Hempstead caps the pool plus all accessory structures at 40%, and Garden City won't allow a pool on a lot under 12,000 square feet.
How much does a small inground pool cost on Long Island?
A simple vinyl liner rectangle is the lowest published installed price here, $35,000 – $100,000 (median $55,000), before patio and fence. Keeping the size standard and skipping the spa keeps it near the low end.
Do Long Island pool builders offer financing?
Many do, through third-party lenders, and home-equity loans are the other common route. Compare the loan's rate and fees separately from the pool quote, and don't let financing terms replace a written, itemized estimate.
Sources
Related guides
- The best time to build a pool on Long Island: a month-by-month plan
- Gunite vs vinyl vs fiberglass pools on Long Island
- How big a pool fits your Long Island lot? Setbacks, worked out
- Pool alarm requirements in New York: what Long Island pools need
- Pool drainage and dry wells on Long Island: where the water can go
- East End pool energy rules: pumps, pipes and off-peak filtering
- Pool excavation and site prep on Long Island, town by town
- Pool heaters on Long Island: gas, propane, heat pump or solar
- Pools near power lines on Long Island: the clearance rules
- Removing a pool before selling a house on Long Island
- Reopening an old pool on Long Island: what it takes and costs
- Inground vs semi-inground vs above-ground pools on Long Island