New inground pool prices by type
| Job | Published LI range | Median | Sources | What moves the price |
|---|---|---|---|---|
| Inground vinyl liner pool, installed | $35,000 – $100,000 | $55,000 | 3 | Size, steel vs polymer walls, liner thickness, steps, and how much patio and fencing is in the price. |
| Inground fiberglass pool, installed | $45,000 – $120,000 | $75,000 | 4 | Shell size and model (shells are trucked in, so width is limited), crane access, and site work. |
| Inground gunite (concrete) pool, installed | $60,000 – $250,000 | $102,500 | 4 | Size, shape, finish (plaster, quartz or pebble), tile and coping, and how far the truck can reach the yard. |
| Inground pool, any type, installed | $45,000 – $200,000 | $107,500 | 2 | Type, size, access, soil and groundwater, permits, fencing, patio, heater and features. |
The low end of each range is usually a basic package: a standard rectangle, a modest patio and stock equipment. The high end includes custom shapes, larger patios and upgraded finishes. Gunite has the widest spread (about $60,000 to about $250,000) because it's built on site to any shape and size. Compare the types: gunite, vinyl liner and fiberglass. Smaller budget? See semi-inground pool costs.
Small inground pool cost
"Small inground pool" is one of the most-searched pool phrases in Nassau and Suffolk, and the honest answer is that small saves less than people expect. A 12×24 or 14×28 vinyl pool still needs the same excavator, permit, survey, plumbing, electrical work and fence as a 16×32, so it lands near the bottom of the vinyl range (about $35,000 and up) rather than far below it. The real savings come from the extras: a smaller patio, one set of steps, no spa and stock equipment. Below that, a plunge pool or a semi-inground (partial inground) pool is the next step down.
Bigger projects and add-ons
| Job | Published LI range | Median | Sources | What moves the price |
|---|---|---|---|---|
| Mid-size 16×32 gunite pool, standard features | $105,000 – $130,000 | $117,500 | 1 | A common Long Island size with standard features; spas, waterfalls and premium finishes are extra. |
| Pool with spa, patio and features | $90,000 – $150,000 | $120,000 | 1 | The full backyard: pool, attached spa, patio and features. |
| Attached spa / hot tub added to a new pool | $15,000 – $25,000 | $20,000 | 1 | Raised or flush spa, heater sizing and spillover. |
| Item | Published figure | Source |
|---|---|---|
| Resurfacing finishes, per square foot of pool surface | Plaster $4–$7 (5–7 year life); pebble $7–$12 (10–15 years); fiberglass $15–$25 (20+ years) | Long Island pool renovator E (published resurfacing cost guide) |
| Gunite pool by size | 14×28 from $90,000; 16×32 about $105,000–$130,000; 20×40 often over $140,000 | Long Island pool builder C (published vinyl, gunite and resurfacing cost guides, 2026) |
| Gunite build time and permit time | 10–16 weeks of construction (curing required); 4–6 weeks for the permit | Long Island pool builder F (published gunite price range on its Levittown page) |
| Liner job line items that are easy to miss | Draining $500–$700; old liner disposal $75–$150; refill water $60–$600 | Nassau County pool supply company G (published liner replacement cost guide) |
| Yard restoration after a pool removal | $1,000–$4,000 for topsoil and seed or sod | Nassau/Suffolk demolition company H (published 2026 pool removal price table) |
| Common upgrades on a new pool | Waterfall $5,000–$20,000; tanning ledge $3,000–$8,000; LED lighting $3,000–$6,000 | Long Island pool design-build firm B (published pool cost guide) |
| Liner life | About every 8 to 10 years | Long Island pool builder C (published vinyl, gunite and resurfacing cost guides, 2026) |
| Semi-inground pool kits (kit only, before installation) | About $2,500–$7,800 on sale (list $3,800–$9,700) | Online pool retailer K (published semi-inground pool kit prices, kit only) |
| Pool patio materials, per square foot installed | Stamped concrete $12–$22; concrete pavers $15–$25; brick pavers $15–$30; travertine $18–$35; full-thickness bluestone $20–$40 (thermal bluestone more) | Suffolk masonry contractor L (published pool patio material prices, 2026) |
| Automatic cover fabric replacement | About every 5 to 8 years, $2,000 or more | Smithtown pool builder M (published automatic safety cover guide) |
| Aboveground pool extras (one Nassau builder, 2026) | Pool kit alone $800–$4,500; foam floor pad $150–$600; chain-link pool fence about $1,350; deck $4–$24 per sq ft; heater installed $1,800–$4,200; liner replacement $2,000–$5,000 every 5–9 years | Nassau/Suffolk pool builder D (published above-ground pool installation guide, May 2026) |
Price guides for add-ons and smaller projects: pool patio cost, pool heater cost, automatic cover cost, hot tub cost, plunge pool cost and leak detection and repair cost.
Permit costs
| Job | Published LI range | Median | Sources | What moves the price |
|---|---|---|---|---|
| Town permit costs for a new pool (as published by builders) | $800 – $4,000 | $2,075 | 2 | Your town or village fee schedule, plus survey, engineering and electrical inspection costs. |
The permit fee is usually the smallest line. The bigger permit-driven costs are what the code makes you build: Garden City wants a 6-foot fence screened with evergreens and underground drainage that can empty the pool in 24 hours, East Hampton wants dry wells and a surveyor's stake-out, and Oyster Bay wants plans sealed by an architect or engineer. Check your town on the pool permits by town page before you compare quotes.
What you'll spend to keep it
| Job | Published LI range | Median | Sources | What moves the price |
|---|---|---|---|---|
| Inground vinyl liner replacement | $4,000 – $7,500 | $6,000 | 3 | Liner thickness and pattern, wall or floor repairs, and draining, disposal and refill. |
| Gunite / concrete pool resurfacing | $6,000 – $15,000 | $10,500 | 2 | Finish type, pool size, tile line and any crack or shell repairs found once it's drained. |
A vinyl pool's liner needs replacing about every 8 to 10 years; a gunite pool's plaster needs resurfacing on a longer cycle that depends on the finish. Fiberglass avoids both but costs more up front. Details: liner replacement and resurfacing.
What moves a Long Island pool price
- Access. Excavators, concrete trucks and, for fiberglass, a crane have to reach the yard. Tight side yards and overhead wires add cost or rule out a fiberglass shell.
- Setbacks and lot size. A pool that has to sit 20 or 35 feet from the lines (Garden City) or twice the normal accessory setback (East Hampton) may need a smaller shell or a different spot.
- Water and drainage. Dry wells, engineered drainage and on-site disposal rules vary by town and add materials and labor.
- Fence. A 4-foot fence and a 6-foot fence with evergreen screening are very different line items.
- Home values. Nassau's median home value is about $685,000 and Suffolk's about $578,000 (Census, ACS 2020–2024 5-year). The median published vinyl price is about 8% of Nassau's median home value.
How to compare quotes
Ask every builder to price the same scope in writing: pool type, size and depth; finish; equipment (pump, filter, heater) and whether the pump meets your town's energy rules; patio area and material; fence and gates; drainage or dry wells; permit filing, survey and plans; and who restores the lawn. Then check each company's Nassau or Suffolk license.
How we built this price survey
We recorded the prices that Long Island pool builders, renovators and demolition companies publish on their own websites. Each figure is a published range or "starting at" price for that job. For each job we report the lowest and highest published figure, the median of the published ranges, and how many companies published a price for it. A company that published the same job on several pages is counted once. We did not call for quotes, and the page does not say which company charges what.
We used 14 sources: Long Island pool builders, renovators, a pool supply company, demolition companies, a masonry contractor and one online kit retailer (kit prices only). "Range" is the lowest to highest published figure for each job, "Median" is the middle of each source's midpoint, and "Sources" is how many companies published a price for it. Rows with one source are one company's figure, not a market range. We'll re-check every quarter and update the date at the top.
Frequently asked questions
How much does an inground pool cost on Long Island?
Published Long Island prices put a vinyl liner pool at $35,000 – $100,000 (median $55,000), fiberglass at $45,000 – $120,000 (median $75,000) and gunite at $60,000 – $250,000 (median $102,500), checked November 2026. Patios, fencing, heaters and spas are often extra.
What is the cheapest inground pool on Long Island?
Vinyl liner pools have the lowest published entry price ($35,000), but you'll replace the liner about every 8 to 10 years at $4,000 – $7,500 each time. Over 20 to 30 years, the gap to fiberglass narrows.
Can you get an inground pool on Long Island for $30,000?
Not based on what Long Island builders publish. The lowest published installed figure for any inground pool in our survey was $35,000 for a basic vinyl liner pool. Semi-inground pools cost less; see the semi-inground cost guide.
How much does a 16x32 gunite pool cost on Long Island?
One Long Island builder publishes $105,000 – $130,000 for a mid-size 16×32 gunite pool with standard features. Spas, waterfalls and pebble finishes add to that.
Do permits add much to the cost?
Builders publish town permit costs of $800 – $4,000. Survey, sealed plans, electrical inspections and the fence can add more, and some towns require a Health Department approval or a surveyor's stake-out first.
Why are Long Island pool prices higher than national averages?
Labor and permitting cost more here, and the town codes add items national guides skip: 5- or 6-foot fences in some towns, dry wells for pool water, engineered drainage, and setbacks that can mean extra excavation and hauling on tight lots.
Sources
- Long Island outdoor-living contractor A (published 2026 pool cost guide): LI contractor cost guide (ranges)
- Long Island pool design-build firm B (published pool cost guide): LI contractor cost guide (ranges)
- Long Island pool builder C (published vinyl, gunite and resurfacing cost guides, 2026): LI contractor cost guides (ranges)
- Nassau/Suffolk pool builder D (published gunite vs fiberglass cost comparison): LI contractor cost comparison (ranges)
- Long Island pool renovator E (published resurfacing cost guide): LI contractor per-square-foot finish prices
- Long Island pool builder F (published gunite price range on its Levittown page): LI contractor published range
- Nassau County pool supply company G (published liner replacement cost guide): LI supplier cost guide (ranges)
- Nassau/Suffolk demolition company H (published 2026 pool removal price table): LI demolition company price table
- Long Island junk and demolition company I (published pool demolition guide): LI demolition company ranges
- Suffolk County excavation company J (published pool removal cost): LI contractor published range
- Online pool retailer K (published semi-inground pool kit prices, kit only): retail kit prices, installation not included
- Suffolk masonry contractor L (published pool patio material prices, 2026): LI contractor per-square-foot patio prices
- Smithtown pool builder M (published automatic safety cover guide): LI contractor cover guide (maintenance cost)
- Nassau/Suffolk pool builder D (published above-ground pool installation guide, May 2026): LI contractor cost guide (ranges)