What you pay for
- The kit: walls (steel, resin or aluminum), liner, pump, filter and steps. Online pool retailer K (published semi-inground pool kit prices, kit only): About $2,500–$7,800 on sale (list $3,800–$9,700).
- Digging and base: the pool sits partly in the ground, so there's excavation, a level base and backfill. Sloped yards are where semi-inground pools make the most sense.
- Deck or surround: most owners deck the exposed side; a deck may need its own building permit (Oyster Bay requires a separate application for decks beyond a pre-fab pool deck).
- Fence and alarm: the same state barrier rules apply, and some towns require more. See pool fence rules by town.
- Permit: filed like an inground pool in Oyster Bay, with sealed plans.
Compare with the alternatives
| Job | Published LI range | Median | Sources | What moves the price |
|---|---|---|---|---|
| Inground vinyl liner pool, installed | $35,000 – $100,000 | $55,000 | 3 | Size, steel vs polymer walls, liner thickness, steps, and how much patio and fencing is in the price. |
| Aboveground pool removal and haul-away | $400 – $2,500 | $1,550 | 2 | Pool size and whether a deck comes out too. |
More on the trade-offs: semi-inground pools on Long Island and semi-inground vs inground.
Frequently asked questions
How much does a semi-inground pool cost on Long Island?
We couldn't find a Long Island installer that publishes installed semi-inground prices, so we won't invent one. Kits from one online retailer run about $2,500–$7,800 on sale (list $3,800–$9,700) before installation, HomeAdvisor's national installed range is $7,000 to $25,000, and local labor, digging, a deck and the fence usually put Long Island projects toward or above the top of that range. Get two or three written quotes.
Is a semi-inground pool cheaper than an inground pool?
Yes, by a wide margin. The lowest published Long Island price for an inground vinyl pool is $35,000, several times a typical semi-inground project.
Does a semi-inground pool need a permit on Long Island?
Yes in the towns we checked. Oyster Bay's permit checklist puts semi-inground pools with inground pools (plans signed and sealed by an architect or engineer), and every code we read requires a barrier around pools deeper than 18 to 24 inches. A semi-inground pool's exposed wall may count toward that barrier only if your town's code allows it.
Sources
- Long Island outdoor-living contractor A (published 2026 pool cost guide): LI contractor cost guide (ranges)
- Long Island pool builder C (published vinyl, gunite and resurfacing cost guides, 2026): LI contractor cost guides (ranges)
- Nassau/Suffolk demolition company H (published 2026 pool removal price table): LI demolition company price table
- Online pool retailer K (published semi-inground pool kit prices, kit only): retail kit prices, installation not included
- HomeAdvisor: semi-inground pool cost (national installed range)
- Town of Oyster Bay pool permit checklist (semi-inground pools need sealed plans)