Long Island pool guide

Pool drainage and dry wells on Long Island: where the water can go

Why drainage is on the permit

Pools get drained for repairs, backwashed through the filter, and overflow in storms. Long Island’s codes treat that water as the owner’s problem to keep on the lot, and several put the plan on the permit drawings.

Town by town

Office What the code requires
Town of Babylon All overflow and drain water disposed of on the lot; plans show how it’s kept off neighbors and the street
Town of Smithtown Same: on the owner’s land, shown on the plans
City of Glen Cove On your own lot, or into an existing city storm sewer at your expense with the Director of Public Works’ permission
Village of Garden City Permanent underground disposal (diffusion wells) that can empty the whole pool within 24 hours, separate from house drains
Town of East Hampton One or more dry wells for all discharged water; never into wetlands, onto a bluff or into a street
Village of East Hampton Dry wells set in sand that can drain the whole pool within 12 hours
Town of Riverhead Near wetlands: a pump-out and a dry well at least 4 ft across and 4 ft deep
Town of Shelter Island Dry wells at least 8×8 ft, 2 ft above the water table, 50 ft from drinking wells, 75 ft from wetlands, 20 ft from septic
Town of Southold New hard surfaces must hold a 2-inch rainfall on site
Towns of Hempstead and North Hempstead Drainage certified by a NY-licensed engineer before the permit

Planning tips

  • Put the dry well on the drawings and keep it clear of the septic system and any well (Shelter Island’s distances are a good yardstick even where they aren’t required).
  • Think about backwash, not just full drains: cartridge filters produce less backwash water than sand filters.
  • Don’t let the patio pitch toward the pool. Glen Cove and Lindenhurst both require the area around the pool to drain away from it.

More rules by town: pool permits by town.

Frequently asked questions

Can I drain my pool into the street on Long Island?

Not in the codes we read. Babylon, Smithtown and Glen Cove keep pool water off the street (Glen Cove allows a storm-sewer connection only with the Director of Public Works' permission). East Hampton, Garden City and Shelter Island bar it outright.

How big does a pool dry well have to be?

It depends on the town. Riverhead requires at least 4 feet across and 4 feet deep near wetlands; Shelter Island requires at least 8 by 8 feet (or equivalent linked wells), 2 feet above the water table. Garden City sizes it to empty the whole pool within 24 hours, and the Village of East Hampton within 12.

Does a new pool patio need drainage on the North Fork?

In the Town of Southold, any new hard surface must be able to hold a 2-inch rainfall on site (gutters, leaders, dry wells) before a permit is issued.

Sources

  1. Town of Babylon Code § 213-270
  2. Town of Smithtown Code Ch. 252
  3. City of Glen Cove Code Ch. 248
  4. Village of Garden City Code § 200-45
  5. Town of East Hampton Code § 255-11-89
  6. Village of East Hampton Code § 278-5
  7. Town of Riverhead Code § 301-230
  8. Town of Shelter Island Code Ch. 113
  9. Town of Southold Code § 236-9

Get a written price for your pool project

Tell us your town and the project. A licensed, independent Long Island pool company calls you back and gives you the price before any work starts. Free to ask, no obligation.

Get a free quote Call (631) 856-2404
  • No fee to you
  • Price in writing first
Call (631) 856-2404 Get a quote