The question people actually ask
It shows up in Long Island Facebook groups every winter: we just moved in, the previous owners hadn’t opened the pool in years, it holds water but it’s full of debris. What will it take, and what will it cost, to have it working next summer? The honest answer is that nobody can price it until someone looks. But the order of operations is the same every time.
1. Book an assessment, not an opening
An opening assumes the pool worked last fall. An assessment assumes nothing. Ask for:
- The shell or liner: for vinyl, tears, a brittle liner pulling out of its track, and rusted wall panels behind it; for gunite, cracks, delamination and rough plaster.
- A pressure test of the plumbing: lines that sat dry or froze crack underground, and a pool that “holds water” can still be losing it through the returns.
- The equipment: pumps, filters and heaters that sat for years often need replacing, not servicing.
- The fence and gates: they have to meet today’s barrier code before the pool is used.
Fall and winter are the easiest times to get this done; by April, every company’s spring schedule is full.
2. Don’t drain it yourself
Pumping out a long-neglected pool is where people do the most damage. On Long Island’s south shore and in places with dense glacial till, groundwater can sit within a few feet of the surface. The USDA soil survey puts about half of Massapequa’s and Montauk’s land on soil with a seasonal water table within about 3 feet. An empty vinyl pool can float its liner, and an empty concrete pool can lift. Let the pool company check first.
3. Price repair against replacement
Published Long Island prices (checked November 2026):
| Job | Published LI range |
|---|---|
| New vinyl liner | $4,000 – $7,500 |
| Gunite resurfacing | $6,000 – $15,000 |
| Heater, gas or heat pump | $3,000 – $8,000 |
| Salt system, if you’re converting | $2,000 – $5,000 |
| Removal, any method | $5,000 – $25,000 |
| New inground vinyl pool | $35,000 – $100,000 |
If the old pool sits closer to the property line than today’s setbacks allow, a repair keeps it where it is, while a replacement has to meet current rules. In the Town of Islip, for example, that’s 10 to 25 feet depending on the district. That alone can tip the decision (pool renovation, pool removal).
4. Before you buy a house with a pool
If you’re still in contract, ask the seller for the pool permit and certificate of completion, and have the pool assessed separately from the home inspection. A pool without a closed-out permit can delay a sale or a future refinance (selling a house with a pool).
Need it done? Call for pool renovation & remodeling on Long Island. Local guides: pools in Levittown, pools in Lindenhurst, pools in Rocky Point, pools in East Islip.
Frequently asked questions
What will it cost to get a long-neglected pool working by next summer?
It depends on what failed. A new vinyl liner runs $4,000 – $7,500 and gunite resurfacing $6,000 – $15,000 on published Long Island prices; a new heater $3,000 – $8,000. Plumbing leaks and a failed pump are on top. An assessment in the fall or winter tells you which apply before the spring rush.
Should I drain an old pool that's full of debris?
Not yourself. Where the water table is high, an empty pool can float a liner or crack a floor. Let a pool company check the groundwater, pump out the water and debris in stages, and inspect as it goes.
Can I just fill in an old pool instead?
Yes, with a permit or notice in most Long Island towns. Partial fill-in of a vinyl pool runs $5,000 – $11,000 and full removal $10,000 – $25,000 on published prices. Brookhaven and Islip require notifying the building inspector, Riverhead the zoning officer, and Babylon requires a demolition permit to regrade.
Does an old pool need a new fence or alarm to reopen?
Often. The barrier has to meet today's code, and some towns require alarms on every pool, existing ones included (the Town of Hempstead since 2009). Check the fence height, gaps and gate hardware against your town's rules before you fill.