Hampton Bays site check: homes, soil, flood zones and water
| Hampton Bays | Here | Suffolk County |
|---|---|---|
| Single-family detached homes | about 90% | about 80% |
| Owner-occupied | about 82% | about 82% |
| Median home value | about $735,000 | about $578,000 |
| Built before 1960 | about 18% | about 31% |
| Homes per square mile | 680 | – |
| Most common soil | Carver and Plymouth soils (3–15% slopes): loose sand on hilly moraine ground (38% of land) | |
| Land on 8%+ slopes | 11% | |
| Soil with a seasonal water table within ~3 ft | 6% | |
| Land in a FEMA flood zone | 11% (AE 8%, VE 2%) | |
| Public water supplier | Hampton Bays Water District (73%); 27% of land is outside any mapped system | |
| Pool permits from | Town of Southampton Building & Zoning Division, (631) 287-5700 | |
Hampton Bays’s homes
Hampton Bays is the most year-round of the Southampton hamlets on this site, but still about 29% of homes are held for seasonal use. About 90% are single-family detached, the median build year is 1977, and the median value is around $735,000 (Census ACS 2020–2024). At about 680 homes per square mile, there’s roughly 41,000 square feet of land per home spread evenly.
Southampton’s equipment rules on a Hampton Bays lot
The Town of Southampton cares most about the machinery: the pump, filter and heater sit 10 feet from every property line (8 feet when the whole lot is R-10), screened and quieted, and pump type and pipe size scale with the pool’s surface area. On Hampton Bays’ many quarter-acre lots, that 10-foot ring is what decides where the equipment pad goes, often beside the garage rather than behind the pool. Sizes and thresholds: Town of Southampton pool permit page.
Water
The Hampton Bays Water District supplies the hamlet and has asked customers to follow an odd-even watering schedule in past summers. Filling a pool takes tens of thousands of gallons, so plan the fill with the district’s conservation notices in mind.
Published Long Island prices: vinyl $35,000 – $100,000, gunite $60,000 – $250,000.
Hampton Bays is almost all sand
No town on this site has sandier ground. The USDA soil survey maps about 89% of Hampton Bays’ land as excessively drained soil, nearly all Carver and Plymouth sand of the outwash plain and moraine, and about 11% of the land is on slopes of 8% or more. A seasonal water table within about 3 feet shows up on only about 6% of the land, mostly near the bay.
For a pool, that’s a mixed blessing. Sand digs fast and drains fast, which makes Southampton’s dry-well requirements easy to meet. But the excavation walls won’t stand on their own, so the hole is sloped back or shored and the backfill is compacted in lifts so the coping and patio don’t settle. Get the backfill method in writing.
About 11% of the hamlet’s land is in a FEMA flood zone in our sample (8% AE, 2% coastal VE), along Shinnecock and Tiana bays and the canal, with base flood elevations up to 22 feet. Water comes from the Hampton Bays Water District (about 73% of land on EPA’s map); the rest of the land is outside any mapped public system.
Hampton Bays pool add-ons
About 29% of Hampton Bays homes are seasonal (Census ACS 2020–2024), so automatic covers and efficient heat pumps come up on most quotes, and Southampton’s rules on pump speed and pipe size apply to both.
| Soil | Share of land | What it is | Seasonal water table |
|---|---|---|---|
| Carver and Plymouth soils (3–15% slopes) | 38% | loose sand on hilly moraine ground | deeper or not rated |
| Carver and Plymouth soils (0–3% slopes) | 19% | loose sand on hilly moraine ground | deeper or not rated |
| Plymouth loamy coarse sand (0–3% slopes) | 12% | loose, excessively drained coarse sand | deeper or not rated |
| Carver and Plymouth soils (15–35% slopes) | 10% | loose sand on hilly moraine ground | deeper or not rated |
Guides for Hampton Bays homeowners
Hampton Bays pool questions
Who supplies water to fill a pool in Hampton Bays?
The Hampton Bays Water District, a Town of Southampton district, serves the hamlet. It has run an odd-even lawn watering program in summer, so ask about current conservation requests before filling.
What pump does a Hampton Bays pool need?
Under the Town of Southampton code: under 500 square feet, a 1-horsepower-or-smaller single- or two-speed pump or a variable-speed pump; 500 to 799 square feet, multispeed; 800 square feet or more, variable speed.
Is the pool heater permit cheaper if it's solar?
Yes. The Town of Southampton waives the building permit fee for installing or replacing a pool heater when it's a solar heating system.
Is Hampton Bays sand a problem for an inground pool?
Not if the builder plans for it. About 89% of the hamlet is excessively drained sand (USDA soil survey), so excavation walls are sloped or shored and backfill is compacted in lifts. The upside is fast drainage for the dry wells Southampton requires.
Sources
- U.S. Census Bureau, ACS 2020–2024 5-year: Hampton Bays and Suffolk County housing tables
- USDA NRCS, Soil Survey Geographic Database (SSURGO) via Soil Data Access
- USDA NRCS Web Soil Survey (look up your own lot)
- FEMA Flood Map Service Center, National Flood Hazard Layer
- U.S. EPA, Community Water System Service Area Boundaries
- Town of Southampton Code Ch. 123 Art. VI, Swimming Pools
- Town of Southampton Code § 330-77, accessory placement
- Town of Southampton: Hampton Bays Water District